Breaking News Bar
posted: 11/14/2017 1:00 AM

FAA investigating plane's emergency landing in Grayslake

hello
Success - Article sent! close
  • A Cary pilot flying a 1979 single-engine Cessna 210 from South Dakota had to make an emergency landing Sunday evening at Campbell Airport in Grayslake. He was not injured, and the damage to the plane was minor.

    A Cary pilot flying a 1979 single-engine Cessna 210 from South Dakota had to make an emergency landing Sunday evening at Campbell Airport in Grayslake. He was not injured, and the damage to the plane was minor.
    Courtesy of ABC 7

 
 

The Federal Aviation Administration is investigating what led to the emergency landing of a small aircraft Sunday evening at Campbell Airport in Grayslake.

FAA spokeswoman Elizabeth Cory said investigators will look into whether the plane, a 1979 single-engine Cessna 210, and the pilot, a 29-year-old Cary man, were certified for the flight.

"Our investigation is to make sure that the rules of flight were followed," Cory said.

She did not say what had been found so far because the agency does not comment on open investigations.

The pilot was flying from Pierre, South Dakota, to Chicago Executive Airport in Wheeling when he began experiencing engine trouble, the Grayslake Fire Protection District said.

The plane landed 100 to 150 feet short of the runway on the west side of the airport and skidded through a farm field and across a bridge before coming to rest on the far west end of the runway.

Fire crews arrived shortly before 6 p.m. to find the pilot outside the airplane uninjured. A preliminary report from the FAA describes the damage to the plane as minor.

Fire crews mitigated a small fuel spill on the ground and turned the scene over to the Lake County sheriff's office and the FAA.

Article Comments ()
Guidelines: Keep it civil and on topic; no profanity, vulgarity, slurs or personal attacks. People who harass others or joke about tragedies will be blocked. If a comment violates these standards or our terms of service, click the X in the upper right corner of the comment box. To find our more, read our FAQ.